|
Differential Gain
<0.2%
Differential Phase
<0.5°
Gain
± 0.15dB
Signal-to-Noise Ratio
>65dB
Frequency Response
Composite: 10Hz to 100MHz, -3dB
S-Video: 10Hz to 8MHz, -3dB
Compatibility
NTSC, PAL and SECAM
A/D Converter
12-bit, 110MHz
D/A Converter
12-bit, 74.25MHz
Input Level/Impedance
1V peak-to-peak/75O
Output Level/Impedance
1V peak-to-peak/75O
Performance (Component Video)
Impedance
75O
Bandwidth
>100MHz
Insertion Loss
<3dB
Compatibility
3-channel (Y, Pr, Pb) format-independent
Frequency Response
10Hz to 100MHz, -3dB
HDMI Performance
HDMI Input
Video: 480i/p, 576i/p, 720p or 1080i
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz)
HDMI Output
Video: 480i/p, 576i/p, 720p or 1080i
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz)
Inputs
HDMI (Version 1.1)
2 HDMI Type A, 19-pin connectors
Analog Video
Three component video, RCA connectors
Four S-Video connectors
Four composite video, RCA connectors
Digital Audio
Four S/PDIF coaxial (RCA) and four S/PDIF optical (Toslink) connectors (coaxial and optical input connectors conform to IEC-956, S/PDIF standards)
One USB mini-B connector
Analog Audio
One 8-channel input array, RCA connectors
Six stereo RCA connectors
One microphone, 3.5mm mono mini plug
1 dock 30-pin connector (for optional docking station)
Control
One RS-232, 9-pin, D-sub connector
One IR receiver, on front panel
One 3.5mm IR in jack - input voltage: 3v - 15 , input current: 10mA, frequency: 20Hz - 1kHz, accepts either stereo plug (tip/ring/sleeve) or mono plug
Outputs
HDMI (Version 1.1)
One HDMI Type A, 19-pin connector
Analog Video
One component video, RCA connector
One S-Video connector
One composite video, RCA connector
Analog Audio
One 8-channel pre-amplifier plus additional subwoofer, RCA connectors
Zone 2 analog out, 1 RCA stereo connector
Control
Two triggers - one power on/off and one programmable, 3.5mm mono mini plugs, 12VDC, 300mA maximum output draw
Performance (Main Zone and Zone 2)
A/D Conversion
24-bit, 96kHz, dual-bit
D/A Conversion
24-bit, 44.1 to 192kHz, multi-bit
Input Sensitivity
200mV for analog 1 to 6, and 200mV for 8-ch input
Max input level: 2Vrms
Input Impedance
98.5kO for analog 1 to 6, and 32kO for 8-ch input
Frequency Response
10Hz to 40kHz, +0, -2dB
THD + Noise
<0.05%, 20Hz to 20kHz
Dynamic Range
100dB typical, 22kHz bandwidth
Signal-to-Noise Ratio
100dB typical, 200kHz bandwidth, min 100dBA, 103dBA typical
Output Level
200mV typical, 6Vrms maximum
Output Impedance
570O
General
Power Requirements
90-250VAC, 50-60Hz, 50W (universal line input), IEC detachable power cords (supplied)
Power Consumption
3.76W at power on, idle, 47.2W at rated power output (HDMI in/out mode)
Dimensions
Height (with feet): 5.0 inches (127mm)
Height (without feet): 4.3 inches (109mm)
Width: 16.8 inches (426mm)
Depth: 16.7 inches (423mm) (includes knobs, buttons and terminals)
Weight
Net weight: 17.6lb (8kg)
Gross weight: 26.5lb (12kg)
Rack Mounting
Lexicon built rack mount kit not available. Please seek alternative
Operating Environment
Operating temperature: 0 to 45°C (32 to 113°F)
Storage temperature: -20 to 60°C (-4 to 140°F)
Relative humidity: 93% max without condensation
Remote Control
Hand-held, back-lit, IR/RF (RF for use with optional RF-1 receiver) pre-programmed and learning remote control (requires 4 AAA batteries - included)
|
