|
FLAGSHIP DIGITAL BALANCED CONTROLLER WITH HDMI SWITCHING INCLUDING DIGITAL ROOM EQUALIZATION,THX ULTRA 2,12 CHANNELS,3 ZONES,BALANCED XLR OUTPUTS,LOGIC 7,DTS-ES,DOLBY DIGITAL EX,DOLBY PRO LOGIC II Audio Inputs and Outputs Analog Audio Inputs8 stereo pairs (RCA) or 5 stereo pairs and one 5.1-channel analog input 5.1 Analog Input (L, C, R, LS, RS, LFE) 4 rear panel microphone inputs for future expansion Digital Audio Inputs6 coaxial (RCA), 6 optical ( 5 TosLink, and one optical mini jack), 1 AES/EBU; coaxial and optical inputs conform to IEC-958, S/PDIF standards Sample Rates: 44.1, 48, 88.2, 96kHz Accepts: 16-24 bits PCM audio, Dolby Digital, dts and dts-ES discrete data formats Main Audio Outputs12 unbalanced (RCA) and 12 balanced (XLR, MC-12 Balanced only) for front L/R, Center, LFE, Subwoofer L/R, Side L/R, Rear L/R, Auxilliary L/R 8 S-video inputs 5 composite video inputs Zone 2 Audio Outputs2 stereo pairs (RCA, one fixed and one variable output level); 2 balanced (XLR) for L/R variable output (MC-12 Balanced only) Record Audio Outputs2 stereo pairs (RCA, one fixed and one variable output level); 1 coaxial (RCA) and 1 optical (TosLink) S/PDIF output (in parallel) Performance (Main Zone) Analog-to-Digital Conversion24-bit, 96kHz, dual-bit architecture Digital-to-Analog Conversion24-bit, 44.1 to 192kHz, multi-bit architecture, operating in dual-mono mode 1 optical S/PDIF Frequency Response10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, reference 1kHz THD + NoiseBelow 0.008% at 1kHz, maximum output level Dynamic Range108dB minimum, 111dB typical, 22kHz bandwidth Signal-to-Noise Ratio108dB minimum, 111dB typical, 22kHz bandwidth Input Sensitivity200mVrms (2Vrms for maximum output level) at 0dB input gain Input Impedance100k in parallel with 150pF Output Level150mVrms typical, 6Vrms maximum (RCA outputs); 300mVrms typical, 12Vrms maximum (XLR outputs, MC-12 Balanced only); maximum value with full-scale input signal and volume at +12dB Output Impedance100? in parallel with 150pF (RCA outputs); 50 in parallel with 150pF (XLR outputs, MC-12 Balanced only) Performance (Zone 2 and Record Zone) Analog-to-Digital Conversion24-bit, 44.1 to 96kHz, dual-bit architecture (Record Zone only) Digital-to-Analog Conversion24-bit, 44.1 to 192kHz, multi-bit architecture Frequency Response10Hz - 20kHz, +0.1dB/-0.25dB, -0.75 at 40kHz, reference 1kHz THD + NoiseBelow 0.008% at 1kHz, maximum output level Dynamic Range105dB minimum, 108dB typical, 22kHz bandwidth Signal-to-Noise Ratio105dB minimum, 108dB typical, 22kHz bandwidth Input Sensitivity200mVrms (4Vrms for maximum output level) Input Impedance100k in parallel with 150pF Output Level200mVrms typical, 4Vrms maximum (RCA outputs); 400Vrms typical, 8Vrms maximum (XLR outputs, Zone 2 only, MC-12 Balanced only); maximum value with full-scale input signal and volume at 0dB Output Impedance100 in parallel with 150pF (RCA outputs); 50? in parallel with 150pF (XLR outputs, Zone 2 only, MC-12 Balanced only) Video Inputs and Outputs Video Inputs5 composite (RCA), 8 S-video, and 4 component video (3 RCA, 1 BNC) Video Outputs4 composite (RCA, 2 monitor and 2 record), 4 S-video (2 monitor and 2 record), and 1 component (BNC) Performance (Composite & S-video) FormatsNTSC M, PAL, and SECAM compatible SwitchingActive Output Level1.0V peak-to-peak Impedance75 Input Return Loss>40dB Differential Gain<0.5dB Differential Phase<0.5° Bandwidth>25MHz K Factor<0.3% Gain±0.15dB Signal-to-Noise Ratio>70dB Frequency Response10Hz - 10MHz + 0.1/-0.3dB Performance (Component Video) Formats3-channel (Y, Pr, Pb), format-independent SwitchingPassive Impedance75 Bandwidth>300MHz Insertion Loss<3dB Other Microphone Inputs4 3.5mm miniature phone jacks Microphone Input Sensitivity10Vrms (400mV maximum input level) Microphone Input Impedance20k? (accepts balanced or unbalanced input signals) Trigger Outputs1 power on/off trigger, 2 programmable triggers; +12VDC, 0.5 amps each; detachable screw terminals RS-232 Serial Input/Output2 9-pin S-sub connectors for system control and software upgrades Power Requirements90-250 VAC, 50-60Hz, 90W (universal line input), detachable power cord Remote ControlHand-held, backlit infrared remote control unit (requires 2 AA batteries) Environment Operating Temperature0° to 35°C (32° to 95°F) Storage Temperature-30° to 75°C (-22° to 167°F) Relative Humidity95% maximum without condensation Dimensions and Weight Height (with feet)MC-12: 5.65" (144mm) MC-12 Balanced: 6.73" (171mm) Height (without feet)MC-12: 3 rack units MC-12 Balanced: ~4 rack units Width17.3" (440mm) Depth14.85" (377mm) WeightMC-12: 36lbs. (16.4kg) MC-12 Balanced: 45lbs (20.5kg) Rack MountingOptional brackets are available for installing either unit in a standard 19" equipment rack (2 rack units required for MC-12, 3 rack units required for MC-12 Balanced)
|
